Safety Footwear Care Tips

Avoid scuffing the upper leather or treading on sharp edges that could cut or tear the sole.

Clean your safety shoes regularly.

Remove excess mud and dirt and wipe clean with a damp cloth and allow drying thoroughly, preferably overnight at room temperature.

Never force dry your safety footwear if they become wet, as direct heat may distort the upper and cause the leather to crack.

If your safety footwear has a leather upper apply a good quality wax polish or shoe cream regularly.

If your safety footwear has a Nubuck or suede upper it should be gently rubbed with a stiff bristled brush.  

Soles should be checked regularly and stones and metal shavings removed from the cleats.

If the laces become worn, replace immediately to ensure a good fit.

It is very important to note that damaged safety footwear will not provide the necessary protection you require, and they should be replaced immediately if not in the suitable condition to protect your feet.

Lifespan of Safety Footwear

There is no set guide for how long your safety footwear will last. It depends on the environment in which it has been used and stored. PU (Poly-urethane) soles are biodegradable, and if left unused in a dark and humid environment for longer than 36 months, they may degrade.

Water Damage

Most safety footwear is made from leather. Leather is NOT waterproof, or water-resistant, unless it has been specifically treated. If your safety boots are repeatedly exposed to water and mud, and they are not listed as water-resistant, they will eventually crack. We will view this as improper use, and will not replace any shoes which have become damaged as a result. If you polish your safety boots regularly, then the polish will protect against occasional – not regular - water exposure.